- Bright, smooth surface appearance
- Adaptable to a wide range of interior or exterior uses
- Large panel sizes – 35-7/16" x 70-7/8" (900 mm x 1800 mm)
- Will not fade, warp, swell
- Sanitary, wipe clean surface
- High resistance to staining, pollution, graffiti
- Thin and lightweight for easy installation
Neopariés LT is featured in white and black.
Bright white and clean in appearance. Neopariés LT features an ultra smooth and shiny surface with a subtle milky undertone. The panels are thinner than traditional Neopariés and work well in both interior and exterior applications.
| BENDING STRENGTH (N/mm2) |
57 |
| MOH's HARDNESS |
6.0 |
| THERMAL EXPANSION COEFFICIENT (x10-6) |
7.2 |
| WATER ABSORPTION RATE* (%) |
0.0 |
| THICKNESS |
1/4" (7 mm +/- 1.5 mm) |
*Weight increasing rate of test piece of 25" x 25" x 15 mm after 48-hour immersion in water.
Neopariés LT is available in both stock panels and cut to size configurations. Fabrication of the product is similar to sheet glass. Neopariés LT can be cut, chamfered and polished by those who are equipped and comfortable with sheet glass fabrication.
Neopariés LT can be adhered to surfaces such as waterproof plywood, other boards or concrete using traditional mastic adhesives and caulk. L-angle stainless steel supports may also be required to bear the additional weight of larger panels. It is recommended that the substrate wall be primed prior to installation of Neopariés LT.
Complete 3-part CSI format specifications are available by calling 800.426.0279. Please contact Technical Glass Products for more information.
Upon receipt, compare Neopariés LT with the control samples to ensure the correct color has been received. Inspect for blisters, surface defects and any warpage (which should be less than 1.0 mm). Place in a square and measure the panel for squareness. Panels should have an accuracy of 0.1 mm. Standard packaging for Neopariés LT is a wooden crate. Crates should not be stacked more than two high.
To prepare shop drawings or a quote, we will need:
1. Color and dimensions of Neopariés LT and width and color of joints.
2. Details of special edge finish requirements: external corner, inside angle, etc.
3. Radius of curved Neopariés LT and details of installation.
4. Details of installation around openings such as windows, doors, elevators, etc.
5. Dimensions of holes and cutouts for outlets, etc., and position on the structure.